Volkswagen ID.7: Operating Travel Assist

Fig. 1 Left side of the multi-function steering wheel.

Switching on

1. Press the button on the left-hand side of the multi-function steering wheel repeatedly until Travel Assist is selected.
2. Press the button on the right-hand side of the multi-function steering wheel or wait for a short time.

   Travel Assist is switched on.

Starting the regulation function

If you switch from Adaptive Cruise Control (ACC ) to Travel Assist, the vehicle will switch to the following system status in the Travel Assist, depending on the driving situation:

• If ACC is regulating, Travel Assist maintains the current speed and the preset distance from the vehicle driving ahead (system status inactive).

  At the same time, the vehicle is kept in its lane by steering movements when road markings are detected(s ystem status active).

• If ACC is not regulating, Travel Assist is switched on, but stays deactivated.

If the vehicle was in a different assistance system during the previous drive or if Travel Assist remains deactivated after switching on, you must start the regulation function:

1. Press the button.

   Travel Assist switches the driving situation accordingly to an active or inactive system status.

The indicator/warning light corresponding to the driving situation comes on in the instrument cluster display. A notification is also displayed.

Canceling the regulation function

1. Press the button briefly.

   Or: Press the brake pedal.

   The set distance remains saved.

Adjusting further settings

The further operation of Travel Assist corresponds to the operation of the ACC (→ Adaptive Cruise Control (ACC))

Warning levels and braking supportUsing assisted lane changing