Volkswagen ID.3 Owners & Service Manuals
english german french spanish italian dutch polish swedish czech

Volkswagen ID.7: Driving mode selector

The engaged selector lever position is displayed in theI D. display and on the driving mode selector when the ignition is switched on.

Selecting a selector lever position

Fig. 1 On the right side of the steering column: driving mode selector.
Fig. 1 On the right side of the steering column: driving mode selector.

To change into gear from neutral position , proceed as follows:

  1. Switch the ignition on.
  2. Press the brake pedal.
  3. Turn the driving mode selector in the desired direction→ fig. 1 .

Switching strong recuperation on and off

To activate strong recuperation , carry out the following steps:

  1. Turn the driving mode selector from the position forward once → fig. 1 .

    The driving mode selector always springs back.

  2. To switch back to the selector lever position, turn the driving mode selector forward again.

Description of the selector lever positions

Permanent position for driving forwards - the electric drivetrain is in the normal program.

If ECO assistance is activated, recuperation will take place automatically (→ Eco assist) .

Powerful energy recuperation when coasting (→ Energy recuperation) .

The electric drivetrain is in neutral position. No power is transmitted to the wheels and the braking effect of the electric drivetrain is not available.

Reverse gear is selected. Only select this gear when the vehicle is stationary.

The drive gears are mechanically locked. Only switch on when the vehicle is stationary .

Driving on an incline

When driving on an incline, energy recuperation should be used where possible (→ Energy recuperation) .

Stopping and starting to drive uphill

Auto Hold should be used when stopping or starting uphill with the vehicle's drive system activated (→ Auto Hold) .

If you stop on a hill with a gear selected, always press the brake pedal or set the electronic parking brake to prevent the vehicle from rolling away. Only release the brake pedal when you are pulling away.

Crawling feature

If the brake pedal is released when a gear is engaged, the vehicle will start moving at a reduced speed. This allows the vehicle to be started through gentle braking more slowly and more precisely, e.g. when maneuvering. The set vehicle speed is dependent on the slope and the vehicle load.

If Auto Hold is switched on, you can only activate the crawling feature by pressing the accelerator pedal.

WARNING

Engaging the incorrect gear can cause you to lose control of the vehicle, which could lead to accidents and serious injuries.

  • Never press the accelerator pedal when engaging a gear.

WARNING

Fast acceleration or switching off the ASR can cause traction loss and sliding on slippery roads, such as on wet, icy or dirty roads. This could cause loss of vehicle control, accidents and serious or fatal injuries.

  • Only use the kick-down function or accelerate quickly when the visibility, weather, road, and traffic conditions allow it, and when other road users will not be endangered by the vehicle's acceleration and driving style.
  • Always adapt your driving style to the flow of traffic.

WARNING

An unattended vehicle which is ready to drive may cause accidents and severe injuries.

  • Never leave a vehicle which is ready to drive unattended.
  • Always switch the ignition off.
  • When parking or leaving the vehicle, always ensure that the electronic parking brake is switched on.
  • When leaving the vehicle, always make sure that all doors, windows, the trunk lid and the hood are closed completely and locked.
  • When the vehicle is drive-ready and the or gear is engaged, hold the vehicle stationary with the brake pedal.
  • Never shift into reverse gear while the vehicle is moving.

NOTICE

Incorrect handling of the electric drivetrain can lead to increased wear or damage.

  • Only allow the vehicle to roll in gear as an exception (→ Information on the brakes) .
  • If you stop on inclines when a gear is engaged, use the brake pedal and not the accelerator to hold the vehicle.

Troubleshooting

Electric drivetrain overheated

The red warning light turns on.

The electric drivetrain has become overheated.

A corresponding message is shown in the ID. display.

Do not continue driving!

  1. Park your vehicle outside as soon as it is possible and safe to do so.
  2. End drive-ready mode.

    Do not add engine coolant.

  3. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility for assistance.

and Brake energy recuperation not possible

The yellow indicator lights turn on.

Brake energy recuperation is malfunctioning.

This may limit your vehicle's range.

  1. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility to have the system inspected. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

NOTICE

If you allow the vehicle to roll for a long time or at high speeds when the ignition is off, the electric drivetrain is switched off or the 12 V vehicle battery is discharged, the electric drivetrain will become damaged.

  • Note that the vehicle can only be towed under certain conditions (→ Towing) .

Only maneuvering is still possible

The red warning light turns on.

A message is displayed in the instrument cluster and an acoustic warning sounds.

The temperature or the charge level of the high-voltage battery is too low and the drive power is reduced.

Climate control convenience functions are restricted.

If the indicator light comes on while driving, the vehicle is about to have a breakdown in road traffic:

  1. If possible, drive directly to the charging station and observe the power display in the instrument cluster.
  2. If you cannot drive the vehicle to the charging station, park the vehicle safely.
  3. To charge the vehicle away from a charging station, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility for assistance.

If the charge level of the high-voltage battery is very low, two emergency starts are still possible.

If the indicator light come on when the ignition is switched on, the vehicle can still be moved a short distance at approx. 7 km/h (approx. 4 mph):

  1. Charge the high-voltage battery when the charge status is low.

When the power increases again, the indicator light turns off.

When driving in low outside temperatures, Volkswagen recommends activating the vehicle's climate control in advance, before departure. This also heats up the high-voltage battery and increases the driving power available.

Limited driving power

The yellow indicator light turns on.

A message is displayed in the instrument cluster and an acoustic warning sounds.

The driving power is reduced considerably and could reduce further.

Climate control convenience functions are restricted.

  1. Charge the high-voltage battery when the charge status is low.

In extremely cold or hot outside temperatures, the high-voltage battery is heated or cooled while driving. The driving power increases again after a short time.

Take note of the power display in the instrument cluster.

When the power increases again, the indicator light turns off.

Electronic engine sound impaired

The yellow indicator light comes on and an audible signal sounds.

A corresponding message is shown in the ID. display.

  1. Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility to have the system inspected. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Volkswagen ID.7 2024-2025 Owners Manual

Actual pages

Beginning midst our that fourth appear above of over, set our won’t beast god god dominion our winged fruit image

© 2020-2025 Copyright www.vwid7.org